Joe,
What data mode are you in - it must be DATA A (press the AFX/DATA MD
button and turn VFOB to change.
Are you in USB with both Digipan and the K3 data mode - press AFX/DATA
MD button and hold ALT to toggle between USB to LSB if you need to
change the K3.
Yes, BPSK should work, and the cable from the K3 line out jack should be
stereo. Digipan will normally use only the left channel (the tip of the
stereo plug).
73,
Don W3FPR
Joe Word wrote:
> I have read the Elecraft write-up and have questions. I am on 14.070
> and get some data, but not human readable. Using sound card in by
> Compaq Deskpro computer.
>
>
> 1. Do I use a stereo or mono plug for line out? Using stereo now.
>
> 2. Do I use BPSK31 or QPSK31? Using BPSK31 now.
>
> 3. Assume the K3 should be set to DATA Mode?
>
> What else do I need to know? I am starting at ground zero.
>
>
_______________________________________________
Elecraft mailing list
Post to:
Elecraft@...
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
