JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

[Michael.Czapski]

Some javascript/style in this post has been disabled (why?)

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Lixin Tang]

Some javascript/style in this post has been disabled (why?)

Michael,

 

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

 

Let me know if any further questions.

 

Thanks

 

Lixin

---

From: [hidden email] [mailto:[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Michael.Czapski]

Some javascript/style in this post has been disabled (why?)

Thanks, Lixin.

I see this in GlassFish ESB v2.1 GA and Java CAPS 6.2 GA. How do I patch either (preferably JC6.2) or both to get the issue fixed? I am working on a demo for a prospect a week from now.

Regards

Michael

Lixin Tang wrote:

Michael,

 

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

 

Let me know if any further questions.

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Lixin Tang]

Some javascript/style in this post has been disabled (why?)

Michael,

 

There are a couple of nbms for HL7 encoder design-time that you'll need to patch because the HL7 BC component didn't package them before (which has now been fixed in GFESBv2.2 by Jonelle).

 

Jonelle,

 

Do you know how to get those nbms for GFESB v2.1 or JCAPS 6.2 GA?

 

Thanks

 

Lixin

---

From: [hidden email] [mailto:[hidden email]]
Sent: Friday, October 30, 2009 12:04 AM
To: Lixin Tang
Cc: [hidden email]; 'Venkat Chellasamy'; 'Jonelle Almero'
Subject: Re: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

Thanks, Lixin.

I see this in GlassFish ESB v2.1 GA and Java CAPS 6.2 GA. How do I patch either (preferably JC6.2) or both to get the issue fixed? I am working on a demo for a prospect a week from now.

Regards

Michael

Lixin Tang wrote:

Michael,

 

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

 

Let me know if any further questions.

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Jonelle Almero]

Some javascript/style in this post has been disabled (why?)

The GFESB v2.1 individual .nbms were built here.  Am including Karl to confirm as well.

    http://nog.sfbay/kits/mirrors/download.java.net/jbi/binaries/ojc-nbm-dt/soa-dev65/nightly/

GFESBv2.1 was released in June so maybe you can get the missing .nbms from the appropriate folder date?

thanks,
Jonelle

Lixin Tang wrote:

Michael,

 

There are a couple of nbms for HL7 encoder design-time that you'll need to patch because the HL7 BC component didn't package them before (which has now been fixed in GFESBv2.2 by Jonelle).

 

Jonelle,

 

Do you know how to get those nbms for GFESB v2.1 or JCAPS 6.2 GA?

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Friday, October 30, 2009 12:04 AM
To: Lixin Tang
Cc: [hidden email]; 'Venkat Chellasamy'; 'Jonelle Almero'
Subject: Re: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

Thanks, Lixin.

I see this in GlassFish ESB v2.1 GA and Java CAPS 6.2 GA. How do I patch either (preferably JC6.2) or both to get the issue fixed? I am working on a demo for a prospect a week from now.

Regards

Michael

Lixin Tang wrote:

Michael,

 

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

 

Let me know if any further questions.

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Michael.Czapski]

Some javascript/style in this post has been disabled (why?)

Hello, Jonelle and Lixin.

Thanks for responding,
I downloaded the following NBMs from a link accessiblke through teh OpenESB site, I don't recall exactly how I got there:

org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-custom-aip.nbm
org-netbeans-modules-encoder-hl7-aip.nbm
org-netbeans-modules-encoder-ui-basic.nbm
org-netbeans-modules-encoder-ui-tester.nbm

Of these all but:
org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-hl7-aip.nbm

were already installed.

I restarted NetBeans but the issue persisted.

What NBMs am I missing or which ones I should replace?

Thanks in advance

Michael

Jonelle Almero wrote:

The GFESB v2.1 individual .nbms were built here.  Am including Karl to confirm as well.

    http://nog.sfbay/kits/mirrors/download.java.net/jbi/binaries/ojc-nbm-dt/soa-dev65/nightly/

GFESBv2.1 was released in June so maybe you can get the missing .nbms from the appropriate folder date?

thanks,
Jonelle

Lixin Tang wrote:

Michael,

 

There are a couple of nbms for HL7 encoder design-time that you'll need to patch because the HL7 BC component didn't package them before (which has now been fixed in GFESBv2.2 by Jonelle).

 

Jonelle,

 

Do you know how to get those nbms for GFESB v2.1 or JCAPS 6.2 GA?

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Friday, October 30, 2009 12:04 AM
To: Lixin Tang
Cc: [hidden email]; 'Venkat Chellasamy'; 'Jonelle Almero'
Subject: Re: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

Thanks, Lixin.

I see this in GlassFish ESB v2.1 GA and Java CAPS 6.2 GA. How do I patch either (preferably JC6.2) or both to get the issue fixed? I am working on a demo for a prospect a week from now.

Regards

Michael

Lixin Tang wrote:

Michael,

 

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

 

Let me know if any further questions.

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Jonelle Almero]

Some javascript/style in this post has been disabled (why?)

Hi Michael,

Looking at the checkin log, the 2 added .nbms were:

    org-netbeans-modules-encoder-hl7-aip.nbm
    com-sun-encoder-hl7.nbm

From your list I did not see com-sun-encoder-hl7.nbm?

thanks,
Jonelle

Michael Czapski, Principal Field Technologist, ANZ APS, SOA/BI/Java CAPS wrote:

Hello, Jonelle and Lixin.

Thanks for responding,
I downloaded the following NBMs from a link accessiblke through teh OpenESB site, I don't recall exactly how I got there:

org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-custom-aip.nbm
org-netbeans-modules-encoder-hl7-aip.nbm
org-netbeans-modules-encoder-ui-basic.nbm
org-netbeans-modules-encoder-ui-tester.nbm

Of these all but:
org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-hl7-aip.nbm

were already installed.

I restarted NetBeans but the issue persisted.

What NBMs am I missing or which ones I should replace?

Thanks in advance

Michael

Jonelle Almero wrote:

The GFESB v2.1 individual .nbms were built here.  Am including Karl to confirm as well.

    http://nog.sfbay/kits/mirrors/download.java.net/jbi/binaries/ojc-nbm-dt/soa-dev65/nightly/

GFESBv2.1 was released in June so maybe you can get the missing .nbms from the appropriate folder date?

thanks,
Jonelle

Lixin Tang wrote:

Michael,

 

There are a couple of nbms for HL7 encoder design-time that you'll need to patch because the HL7 BC component didn't package them before (which has now been fixed in GFESBv2.2 by Jonelle).

 

Jonelle,

 

Do you know how to get those nbms for GFESB v2.1 or JCAPS 6.2 GA?

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Friday, October 30, 2009 12:04 AM
To: Lixin Tang
Cc: [hidden email]; 'Venkat Chellasamy'; 'Jonelle Almero'
Subject: Re: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

Thanks, Lixin.

I see this in GlassFish ESB v2.1 GA and Java CAPS 6.2 GA. How do I patch either (preferably JC6.2) or both to get the issue fixed? I am working on a demo for a prospect a week from now.

Regards

Michael

Lixin Tang wrote:

Michael,

 

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

 

Let me know if any further questions.

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Michael.Czapski]

Some javascript/style in this post has been disabled (why?)

Thanks, Jonelle.

I downloaded sun-encoder-xxx.nbm from http://download.java.net/jbi/binaries/open-esb-full-install/nbm/latest/
I downloaded:
com-sun-encoder-coco.nbm
com-sun-encoder-custom.nbm
com-sun-encoder-hl7.nbm
com-sun-encoder.nbm
org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-custom-aip.nbm
org-netbeans-modules-encoder-hl7-aip.nbm
org-netbeans-modules-encoder-ui-basic.nbm
org-netbeans-modules-encoder-ui-tester.nbm

How do I tell NetBeans to use the versions I downloaded instead of the versions installed already? I don't see any option that allows me to do this.

Thanks for helping out with this

Regards

Michael

Jonelle Almero wrote:

Hi Michael,

Looking at the checkin log, the 2 added .nbms were:

    org-netbeans-modules-encoder-hl7-aip.nbm
    com-sun-encoder-hl7.nbm

>From your list I did not see com-sun-encoder-hl7.nbm?

thanks,
Jonelle

Michael Czapski, Principal Field Technologist, ANZ APS, SOA/BI/Java CAPS wrote:

Hello, Jonelle and Lixin.

Thanks for responding,
I downloaded the following NBMs from a link accessiblke through teh OpenESB site, I don't recall exactly how I got there:

org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-custom-aip.nbm
org-netbeans-modules-encoder-hl7-aip.nbm
org-netbeans-modules-encoder-ui-basic.nbm
org-netbeans-modules-encoder-ui-tester.nbm

Of these all but:
org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-hl7-aip.nbm

were already installed.

I restarted NetBeans but the issue persisted.

What NBMs am I missing or which ones I should replace?

Thanks in advance

Michael

Jonelle Almero wrote:

The GFESB v2.1 individual .nbms were built here.  Am including Karl to confirm as well.

    http://nog.sfbay/kits/mirrors/download.java.net/jbi/binaries/ojc-nbm-dt/soa-dev65/nightly/

GFESBv2.1 was released in June so maybe you can get the missing .nbms from the appropriate folder date?

thanks,
Jonelle

Lixin Tang wrote:

Michael,

 

There are a couple of nbms for HL7 encoder design-time that you'll need to patch because the HL7 BC component didn't package them before (which has now been fixed in GFESBv2.2 by Jonelle).

 

Jonelle,

 

Do you know how to get those nbms for GFESB v2.1 or JCAPS 6.2 GA?

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Friday, October 30, 2009 12:04 AM
To: Lixin Tang
Cc: [hidden email]; 'Venkat Chellasamy'; 'Jonelle Almero'
Subject: Re: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

Thanks, Lixin.

I see this in GlassFish ESB v2.1 GA and Java CAPS 6.2 GA. How do I patch either (preferably JC6.2) or both to get the issue fixed? I am working on a demo for a prospect a week from now.

Regards

Michael

Lixin Tang wrote:

Michael,

 

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

 

Let me know if any further questions.

 

Thanks

 

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael

[Lixin Tang]

Some javascript/style in this post has been disabled (why?)



Michael,

 

You may uninstall the nbm(s) and reinstall them. But in your case, you just get the missing ones instead of overwriting existing ones, right?

 

Regards,

 

Lixin

 

---

From: [hidden email] [mailto:[hidden email]]
Sent: Friday, October 30, 2009 10:20 PM
To: [hidden email]
Subject: Re: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

Thanks, Jonelle.

I downloaded sun-encoder-xxx.nbm from http://download.java.net/jbi/binaries/open-esb-full-install/nbm/latest/
I downloaded:
com-sun-encoder-coco.nbm
com-sun-encoder-custom.nbm
com-sun-encoder-hl7.nbm
com-sun-encoder.nbm
org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-custom-aip.nbm
org-netbeans-modules-encoder-hl7-aip.nbm
org-netbeans-modules-encoder-ui-basic.nbm
org-netbeans-modules-encoder-ui-tester.nbm

How do I tell NetBeans to use the versions I downloaded instead of the versions installed already? I don't see any option that allows me to do this.

Thanks for helping out with this

Regards

Michael

Jonelle Almero wrote:

Hi Michael,

Looking at the checkin log, the 2 added .nbms were:

������ org-netbeans-modules-encoder-hl7-aip.nbm
������ com-sun-encoder-hl7.nbm

>From your list I did not see com-sun-encoder-hl7.nbm?

thanks,
Jonelle

Michael Czapski, Principal Field Technologist, ANZ APS, SOA/BI/Java CAPS wrote:

Hello, Jonelle and Lixin.

Thanks for responding,
I downloaded the following NBMs from a link accessiblke through teh OpenESB site, I don't recall exactly how I got there:

org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-custom-aip.nbm
org-netbeans-modules-encoder-hl7-aip.nbm
org-netbeans-modules-encoder-ui-basic.nbm
org-netbeans-modules-encoder-ui-tester.nbm

Of these all but:
org-netbeans-modules-encoder-coco-ui.nbm
org-netbeans-modules-encoder-hl7-aip.nbm

were already installed.

I restarted NetBeans but the issue persisted.

What NBMs am I missing or which ones I should replace?

Thanks in advance

Michael

Jonelle Almero wrote:

The GFESB v2.1 individual .nbms were built here.�� Am including Karl to confirm as well.

������ http://nog.sfbay/kits/mirrors/download.java.net/jbi/binaries/ojc-nbm-dt/soa-dev65/nightly/

GFESBv2.1 was released in June so maybe you can get the missing .nbms from the appropriate folder date?

thanks,
Jonelle

Lixin Tang wrote:

Michael,

��

There are a couple of nbms for HL7 encoder design-time that you'll need to patch because the HL7 BC component didn't package them before (which has now been fixed in GFESBv2.2 by Jonelle).

��

Jonelle,

��

Do you know how to get those nbms for GFESB v2.1 or JCAPS 6.2 GA?

��

Thanks

��

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Friday, October 30, 2009 12:04 AM
To: Lixin Tang
Cc: [hidden email]; 'Venkat Chellasamy'; 'Jonelle Almero'
Subject: Re: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

Thanks, Lixin.

I see this in GlassFish ESB v2.1 GA and Java CAPS 6.2 GA. How do I patch either (preferably JC6.2) or both to get the issue fixed? I am working on a demo for a prospect a week from now.

Regards

Michael

Lixin Tang wrote:

Michael,

��

This was a known issue, and should have been fixed in recent build(s). This was due to the design-time nbms didn't get installed even though runtime works ok.

��

Let me know if any further questions.

��

Thanks

��

Lixin

---

From: [hidden email] [[hidden email]]
Sent: Thursday, October 29, 2009 8:47 PM
To: [hidden email]
Subject: JCC6,2 encoding style 'hl7encoder-1.0' is not recognized ...' - how do I get the HL7 Encoder into NetBeans?

I am working with HL7 in Java CAPS 6.2. The hl7ecoder-1.0 library is in teh shared libraries. I installed the HL7 BC using the HL7 BC installer from the open-esb site. Runtime works, that is HL7 v2 delimited gets converted to XML and back, when I ask nicely. I just tried to use the Encoder->Test in NetBeans and got the following error.



How do I get and install teh HL7 Encoder NetBeans plumbing? I can't find the download for that, which corresponds to the HL7 BC download.

Please advise.

Michael